Click to change the language

  

#
#
DTE CODE - 6004, PUNE University CODE - cegp014980, Pune University Exam. Center No. : 4078, Automobile Engg. & Mechanical Engg. Programmes are accredited by NBA upto 2024-25

Staff
Name of faculty: Dr. S. A. Sonawane
Designation: Associate Professor, Head of Department
Email: shyamsonawane@gmail.com
Contact No: 02133-230484

Career Objective:

  • To achieve high carrier growth through a continuous learning process and keep myself dynamic, visionary and competitive with the changing scenario of the world.
  • To enhance my working capacities, professional skills and to serve my organization in best way with sheer determination and commitment.

Educational Qualification:
Qualification  Name of the Institute  University Year of Passing
Ph.D. [Mechanical Engineering] Government College of Engineering, Aurangabad Dr. Babasaheb Ambedkar Marathwada University, Aurangabad 2013
M. E. (Mechanical Design) Government College of Engineering, Aurangabad Dr. Babasaheb Ambedkar Marathwada University, Aurangabad 2005
B. E. (Mechanical Engineering) Shri Tulja Bhavani College of Engineering, Tuljapur Dr. Babasaheb Ambedkar Marathwada University, Aurangabad 1998
H. S. C. Kendriya Vidyalaya, CRPF, Barkas, Hyderabad CBSE, New Delhi 1994
S. S. C. Kendriya Vidyalaya, CRPF, Avadi, Madras CBSE, New Delhi

1992

         
Working Experience (Starting with current to old)
Experience Type Institute / Company Name Graduate/ Post Graduate Level Designation From To
Teaching Govt. College of Engineering and Research, Awasari UG Associate Professor 1-9-2017 Till date
Teaching Govt. College of Engg, Aurangabad UG& PG Assistant Professor 13-1-2011 31-8-2017
Teaching Govt. College of Engg. Aurangabad UG& PG Lecturer in Mech. Engg. 2-8-2000 13-1-2011
Teaching Govt. College of Engg. Aurangabad UG Lecturer in Mech. Engg. 18-10-1999 31-05-2000
  >
Research Publications:  
Title of Paper Name of Conference/ Journals in which/where published Year of Publication
Optimization of Process Parameters in TIG Welded Joints for Austenitic Stainless Steel International Journal for Scientific Research & Development, ISSN (online): 2321-0613, Vol. 5, Issue 05, 2017, pp.120-125.
2017
Wear Analysis of Aluminium - Zinc Alloys under Dry Lubrication Journal of Advances in Science and Technology, ISSN 2230-9659, Vol. 13, Issue 01, (Special Issue), 2017, pp. 267-272.
2017
Tribological Behaviour of PTFE and its Composites, Uday Pise, , A. D. Bhatt, R. M. Warkhedkar’ Journal of Advances in Science and Technology, ISSN 2230-9659, Vol. 13, Issue 01, (Special Issue), 2017, pp. 259-266.
2017  
‘Study of Electric Arc Welding Processes on Stainless Steel: A Review International Conference on Advanced and Agile Manufacturing and Agile Software Development, Shri Guru Gobind Singhji Institute of Engineering & Technology, Nanded, 06th –  07th October 2016, pp. 138-142.
2016  
‘Study of Dry Sliding Wear Behaviour of Aluminium-Silicon Alloy with Silicon Carbide (SiC) and Fly Ash Metal Matrix Composite International Journal for Scientific Research & Development, ISSN (online): 2321-0613, Vol. 4, Issue 06, 2016, pp. 688-692
2016  
Experimental Investigation of Wear Properties of Aluminium LM6 Al2O3 Flyash Metal Matrix Composite International Journal for Scientific Research & Development, ISSN (online): 2321-0613, Vol. 4, Issue 06, 2016, pp. 683-687
2016  
Investigations in to Wire Electro Discharge Machining of Ti Alloys VT20 (BT20)’ International Journal of Science and Research, ISSN (online): 2319-7064, Vol. 5, Issue 07, July 2016, pp. 246-251
2016 
Elimination of Sporadic Defects in Polyurethane Lining Process by using Quality Maintenance Methodology International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol. 5, Issue 05, May 2016, pp. 649-653.
2016  
Optimization of Surface Roughness in CNC Turning of Aluminum Alloy ENAC 43400 using Taguchi Method International Journal for Scientific Research & Development, ISSN (online): 2321-0613, Vol. 4, Issue 03, 2016, pp. 308-310.
2016  
Experimental Investigation of Wear Properties of Aluminium LM25 Red Mud Metal Matrix Composite International Journal for Scientific Research & Development, ISSN (online): 2321-0613, Vol. 3, Issue 10, 2015, pp. 691-695.
2015  
Investigation of Tribological Behaviour of GF Filled Peek Composite under the Harsh Operating Conditions International Journal of Engineering Research and Applications, ISSN: 2248-9622, Vol. 5, Issue 11 (Part - 5), November 2015, pp. 01-06.
2015  
‘Comparative study of effect of Cryogenics heat treatment and Case hardening on the Wear Property of 20MnCr5 Applied Mechanics and Materials, Trans Tech Publications, Switzerland, Vol. 798, 2015, pp. 435-439.
2015  
‘Wear Behaviour of Cryogenic Treated M2 Tool Steel under Dry Sliding Condition Applied Mechanics and Materials, Trans Tech Publications, Switzerland, Vol. 798, 2015, pp. 395-401.
2015  
Wear Resistance Enhancement of AISI D3 Tool Steels by Cryogenic Treatment International Journal of Current Engineering and Technology, ISSN (Online): 2277 – 4106, ISSN (Print): 2347 – 5161, Vol. 5, No. 3, June 2015, pp. 1777-1780.
2015  
‘Engine Assembly & Testing Process Quality Improvement Using DMAIC Approach (Six-Sigma) - Case Study International Journal of Engineering and Technical Research, ISSN: 2321-0869, Vol. 3, Issue 6, June 2015, pp. 140-146.
2015  
‘Improving Production Performance with Overall Equipment Effectiveness (OEE) International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181, Vol. 4, Issue 02, February 2015, pp. 700-704.
2015  

Analysis of Wear Resistance of Tool Steel after Deep Cryogenic Treatment 

International Journal of Mechanical and Production Engineering Research and Development, ISSN (online): 2249-8001, ISSN (Print): 2249-6890, Vol. 5, Issue 1, February 2015, pp. 11-24.

2015

Experimental Study and Optimization of Leaf Spring

International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol. 4, Issue 1, January 2015, pp. 532-536.

2015

Effect of Cryogenic Treatment on Wear Behaviour of M35 Tool Steel under Dry Sliding Condition

International Conference on Innovative Materials and Structures Technologies in Metallurgical Engineering, (METECH’14), Istanbul, Turkey, 17th – 19th November 2014, Conference Handbook p. 221.

2014

Effect of Cryogenics Heat Treatment and Case Hardening on the Wear Property of 20MnCr5

International Conference on Innovative Materials and Structures Technologies in Metallurgical Engineering, (METECH’14), Istanbul, Turkey, 17th – 19th November 2014, Conference Handbook p. 219.
2014
A Paper on Plunge Grinding Cycle Time Optimization Without Hampering Surface Quality of Deep Groove Ball Bearing’s Outer Ring’s Inner and Outer Races International Journal of Research in Engineering & Advanced Technology, ISSN: 2320-8791, Vol. 2, Issue 5, October – November 2014, pp. 1-9.
2014
Optimization of Boring Process Parameters by using Taguchi Method International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol. 3, Issue 8, August 2014, pp. 717-721.
2014
Analysis and Optimization of Boring Process Parameters by using Taguchi Method on SAE 1541 International Journal of Engineering Science Invention, ISSN (online): 2319-6734, ISSN (Print): 2319-6726, Vol. 3, Issue 8, August 2014, pp. 59-63.
2014
Effect of Cryogenic Treatment on Wear Behaviour of M2 Tool Steel International Journal of Engineering Science, Vol. 3, Number 2, 2013, pp. 26-33.
2013
Failure Analysis of Machined Component Using Statistical Control Tools International Journal of Engineering Research & Technology, ISSN: 2278-0181, Vol. 2, Issue 12, December 2013, pp. 1903-1909.
2013
Optimum Design of Different Systems Using Principles of Optimization 7th Asian Conference on Fixed Point Theory and Optimization (ACFPTO), University of Kasetsart, Thailand, 18th – 20th July 2013, Conference Handbook pp. 85-86.
2013
Effect of Cryogenic Treatment on Wear Behaviour of M2 Tool Steel International Conference on Advances in Engineering and Technology (ICAET-2013)”organized by SCMR and Sinhgad Institute of Technology and Science, Lonavala, Pune, 15th – 17th May 2013.
2013
Dry Sliding Wear Behaviour of Cryogenic Treated M2 Tool Steel International Review of Applied Engineering Research, ISSN No. 2248-9967, Vol. 3, Number 1, 2013, pp. 87-96.
2013
Wear Behaviour of T-42 Tool Steel International Journal of Multidisciplinary Research, ISSN: 2277-9302, Vol. 1, Issue 12 (X), March 2013, pp. 65-68.
2013
Validation of Eatonite Grade Hard Facing Material in place of Satellite Grade for 150cc Engine Exhaust Valve International Journal of Engineering & Innovative Technology, ISSN: 2277-3754, Vol. 2, Issue 4, October 2012, pp. 44-50.
2012
Wear Analysis of Aluminium-Zinc Alloys using Taguchi Method National Conference on Recent Advances in Mechanical Engineering (NCRAIME 2011) organized by College of Engineering, Osmanabad, 28th – 29th January 2011.
2011
Hybrid Synergy Drive: Achieving the best of both Worlds (Electric Motor and IC Engine) National Conference on Recent Trends in I. C. Engines and Automobiles (RICA 2010) organized by Amrutvahini College of Engineering, Sangamner, 03rd – 04st March 2010.
2010
Quality Function Deployment National Conference on Advances in Mechanical Engineering (AME-09) organized by Don Bosco Institute of Technology, Bangalore, 30th – 31st March 2009.
2009
An Energy Paradigm Pragmatism: Waste Management Approach National Conference on State of the Art of Technologies in Mechanical Engineering (NCSAME-2006) organized by JNTU College of Engineering, Hyderabad, 05th – 06th May 2006.
2006
Application of Alternative Energy: Biomass, Gas and Oil All India Seminar on Alternative sources of Energy and Quality Power Vision-2020 organized by Rajasthan State Centre, The Institution of Engineers (India), Jaipur, 24th –  25th February 2006.
2006
     
Workshops/ Seminars/ Trainings :

Workshop Title
Name of College Duration and Dates
Autodesk Fusion 360 Integrated CAD/CAM/CAE An online non-credit course authorized by Autodesk and offered through Coursera 25/07/2020
Intro to Digital Manufacturing with Autodesk Fusion 360 An online non-credit course authorized by Autodesk and offered through Coursera 11/07/2020
Product Development & Industrial Research -2020 Government College of Engineering, Aurangabad (M.S.) in association with ANKUR-AICF 06/07/2020 to 10/07/2020
Recent Scenario and Future Trends in Automotive Industry Government College of Engineering and Research, Avasari (Kh) 17/12/2018 to 21/12/2018
Faculty Development Program for Student Induction (FDP-SI) All India Council for Technical Education / Christ Institute of Management, Pune 09/07/2018 to 15/07/2018
Mentoring Educators in Educational Technology (FDP301x) Indian Institute of Technology, Bombay 17/05/2018 to 05/07/2018
Best Academic Practices in Engineering Colleges: From Quality to Excellence – A COEP Case Study College of Engineering, Pune 10/10/2017 to 14/10/2017
Pedagogy for Online and Blended Teaching-Learning Process Indian Institute of Technology, Bombay 14/09/2017 to 12/10/2017
Foundation Program in ICT for Education Indian Institute of Technology, Bombay 03/08/2017 to 07/09/2017
3D Printing: A Disruptive Technology of this Era Indian Institute of Technology, Bombay / Government College of Engineering, Aurangabad 20/03/2017 to 22/03/2017
Computational Fluid Dynamics: Development, Application & Analysis Indian Institute of Technology, Bombay / Government College of Engineering, Aurangabad 08/03/2017 to 12/03/2017
Fuels and Combustion Indian Institute of Technology, Bombay / Government College of Engineering, Aurangabad 20/02/2017 to 24/02/2017
Computations and Optimization with MATLAB National Institute of Technical Teachers’ Training and Research, Kolkata 26/12/2016 to 06/01/2017
AutoCAD National Institute  of Technical Teachers’ Training and Research, Kolkata 06/06/2016 to 17/06/2016
Management Capacity Enhancement Programme Indian Institute of Management, Udaipur 04/04/2016 to 09/04/2016
Exposure on MATLAB National Institute  of Technical Teachers’ Training and Research, Kolkata 28/12/2015 to 08/01/2016
Pedagogy to Synergogy Government College of Engineering, Aurangabad 07/12/2015 to 11/12/2015
Computer Aided Product Design and Development Government College of Engineering, Aurangabad 13/10/2015 to 15/10/2015
Technology Enabled Teaching and Learning Indian Institute of Management, Kozhikode 19/08/2015 to 23/08/2015
Computer Aided Product Design SSN College of Engineering, Chennai 15/06/2015 to 27/06/2015
Maintenance Management in Industries National Institute of Technology, Hamirpur 25/12/2014 to 29/12/2014
Big Data Analysis-Foundation Government College of Engineering, Aurangabad 10/12/2014 to 11/12/2014
Fundamentals of Tribology National Institute of Technology, Hamirpur 26/05/2014 to 30/05/2014
Outcome Based Accreditation Government College of Engineering, Aurangabad 22/02/2014 to 24/02/2014
ANSYS Indo German Tool Room, Aurangabad 30/01/2014 to 15/02/2014
Computer Aided Design and Analysis of Machine & Structural Elements Malaviya National Institute of Technology, Jaipur 23/12/2013 to 27/12/2013
CATIA Indo German Tool Room, Aurangabad 2/12/2013 to 17/12/2013
Problem Solving in HVAC Commissioning Indian Society for Heating, Refrigerating and Air Conditioning Engineers (ISHRAE), Mumbai

09/03/2013

Efficient & Sustainable Ammonia Heat Pump Technology Indian Society for Heating, Refrigerating and Air Conditioning Engineers (ISHRAE), Mumbai

09/03/2013

Product Design and Development Indian Institute of Technology Madras, Chennai 21/01/2013 to 26/01/2013
Genetic Algorithm and Neuro Fuzzy Applications in Engineering Government College of Engineering, Aurangabad 17/12/2012 to 21/12/2012
Flight Mechanics and Recent Developments PEC University of Technology, Chandigarh 03/12/2012 to 07/12/2012
Self Management & Team Management for Success-Breaking the Barriers Government College of Engineering, Aurangabad

18/09/2012

Engineering Optimization and its Applications Government College of Engineering, Aurangabad 25/06/2012 to 29/06/2012
Engineering Optimization Techniques and its Application in Research Government College of Engineering, Aurangabad 02/01/2012 to 12/01/2012
Effective Teaching Methodologies National Institute of Technology, Suratkal / National Institute of Technology, Goa 13/06/2011 to 17/06/2011
AutoCAD Training Government Polytechnic, Aurangabad 29/11/2010 to 10/12/2010
Engineering Optimization, EO-2010 Government College of Engineering, Aurangabad 28/06/2010 to 09/07/2010
Optimization Methods for Research and Industrial Problems College of Engineering, Pune

21/03/2009

Heat Treatment, Casting and Surface Engineering Indian Institute of Metals / Marathwada Institute of Technology, Aurangabad 28/11/2008
Efficient Usage of Laboratory and Laboratory Equipment for Students Government College of Engineering, Aurangabad 21/01/2008 to 27/01/2008
Pro / Engineer (Wildfire-2.0) Government College of Engineering, Aurangabad / Indo German Tool Room, Aurangabad 20/03/2007 to 07/05/2007
Implementing Outcomes-based Engineering Curricula through Networked Participatory Action Research Government College of Engineering, Aurangabad 09/09/2006 to 10/09/2006
Designing Student Conducted Studies Government College of Engineering, Aurangabad

30/07/2006

Product Lifecycle Management SGGS Institute of Engineering and Technology, Nanded 10/03/2006 to 12/03/2006
Research Methodologies and Report Writing Government College of Engineering, Aurangabad 18/02/2006 to 19/02/2006
Automotive Standards ISO TS 16949: 02, APQP, FMEA, MSA & SPC MCED / Hotel Taj Residency, Aurangabad 07/02/2006 to 09/02/2006
Recent Trends in Instrumentation and Control SGGS Institute of Engineering and Technology, Nanded 27/01/2006 to 29/01/2006
Organized Modeling and Simulation of Engineering Systems in Multi Energy Domains: A Bond Graph Approach Government College of Engineering, Aurangabad 09/01/2006 to 15/01/2006
PC Maintenance, Networking & Server Administration Government College of Engineering, Aurangabad 07/12/2005 to 11/12/2005
Applications of MATLAB Government College of Engineering, Aurangabad 16/08/2005 to 20/08/2005
Introduction to Computer Aided Engineering Indian Institute of Technology Madras, Chennai 27/06/2005 to 08/07/2005
Organizer MECH FEST-05 Government College of Engineering, Aurangabad 02/04/2005 to 03/04/2005
CNC Turning MTAB-DENFORD Technology Centre, Chennai 04/08/2003 to 08/08/2003
Mathematical Modeling: Concepts & Applications Indian Institute of Technology Delhi, New Delhi 23/06/2003 to 27/06/2003
Achievement 
  • Recognized Ph.D. Research Guide, Dr. Babasaheb Ambedkar Marathwada University,Aurangabad
  • Recognized Post Graduate Teacher and Ph.D. Research Guide, Savitribai Phule Pune University,Pune
  • Chaired Session in International Conference on Emerging Trends in Engineering & Sciences(ICETES) 2019 organized by Jaihind College of Engineering, Junnar, Pune, 26th-27th February 2019
  • Chaired Session in National Conference on Sustainable Development in Mechanical Engineering (NCONSDME-2018) organized by Zeal College of Engineering & Research, Pune, 16th-17th February 2018.
  • Worked as Registrar (Academic) of Government College of Engineering, Aurangabad from 23/09/2015 to 30/08/2017.
  • Worked as Joint Controller of Examinations at Government College of Engineering, Aurangabad from 19/07/2011 to 09/09/2015.
  • Worked as Assistant Controller of Examinations at Government College of Engineering, Aurangabad from 30/07/2008 to 18/07/2011.
  • Worked as Assistant Controller of Examinations at Government College of Engineering, Aurangabad from 16/06/2006 to 11/09/2007.
  • Worked as Post Graduate Coordinator of Mechanical Engineering Department at Government College of Engineering, Aurangabad from 01/08/2011 to 16/08/2017.
  • Worked as Member Secretary of Academic Council of Government College of Engineering, Aurangabad.
  • Worked as Member of Senate of Government College of Engineering, Aurangabad.
  • Worked as member of Board of Studies in Mechanical Engineering at Government College of Engineering, Aurangabad.
  • Delivered lecture on autonomy work culture, Examination conduction, adoption of various systems and the facilities required for running the autonomy to G. H. Raisoni Institute of Engineering & Management, Jalgaon, April 2017.
  • Reviewed papers of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) held at College of Engineering Pune, December 2016.
  • Worked as Vice Chancellors Subject Expert for UGC interviews at Hi-Tech Institute of Technology, Aurangabad, October 2016.
  • Reviewed papers of International Conference on “Advances in Mechanical Engineering-2016” (ICAME-16) held at G H Raisoni College of Engineering, Nagpur, India, June 2016.
  • Reviewed papers of National Conference on “Recent Trends in Mechanical Engineering-2016” (RTME-2016) held at V.V.P. Institute of Engineering and Technology, Solapur, 2016.
  • Chaired Session “Metallurgy and Materials” in International Conference on Advances in Engineering and Technology organized by SCMR and Sinhgad Institute of Technology and Science, Lonavala, Pune, May 2013.
  • Delivered Expert Lecture on CGPA system at MIT Aurangabad, November 2011.
  • Worked as Judge for Pioneer-2011 Project Competition cum Exhibition at Government Polytechnic, Aurangabad, March 2011.
  • Completed a course on Maharashtra State Certificate Course in Information Technology (MSCIT) conducted by Maharashtra State Board of Technical Education, Mumbai, August 2002.
  • Completed a course on Computer Aided Design & Manufacturing at Government College of Engineering, Pune, 04th March – 17th April 1999.
Extra-Curricular Activities

 

  • Was a team member of the Winners in Volleyball in the Annual Games and Sports meet held at Shri Tuljabhavani College of Engineering, Tuljapur, 1996.
  • Was a team member of the Runners in Kabaddi in the Annual Games and Sports meet held at Kendriya Vidyalaya, CRPF, Barkas, Hyderabad, December 1993.
  • Was a team member of the Runners in Kho-Kho in the Annual Games and Sports meet held at Kendriya Vidyalaya, CRPF, Barkas, Hyderabad, December 1993.
  • Was a team member of the Winners in Kabaddi in the Kendriya Vidyalaya Sangathan’s regional meet held at Kendriya Vidyalaya N.P.A. Shivrampally, September 1993.
  • Participated in SPETS Inter School Cross Country Road Race held at Indian Institute of Technology, Madras (Chennai), 21st September 1991.
  • Participated in the Founder’s Day Rally for Camp Tonakela Golden Jubilee Celebrations, Madras (Chennai), 03rd July 1988.
  • Was at Third position in Long Jump in sport meet held at Kendriya Vidyalaya, CRPF Avadi, Madras (Chennai), August 1987.

 

 


                                          Developed & Managed by   Government College of Engineering & Research Avasari ,Pune.
                                                            Web-Information-Manager (Website Content Managed by Computer Engineering Department)
                                   
Security Policy  | Hyperlinking Policy | Terms & Conditions | Privacy Policy | Copyright Policy | CAP | CMAP | CRP | Help
  Best accessible in Google Chrome - 1024x768 Resolution
https://www.Symptoma.es
Website last updated on: